Segula - 50526 "Vintage Line" "Curved Edison style"



Main Image

Test Date: 07/02/2017

Dimming Performance

Minimum brightness from off: <1% Minimum brightness from max: <1%

Smoothness of Dimming

With trailing edge dimmers this lamp performed very well: no static flicker or shimmer while fading could be seen at any output level. The profile was in general smooth but there is a large area of dead travel at the bottom the output range (lamp does not turn on until between 15-29% of dimmer output). This dead travel could be improved by using a custom profile.

Audible Noise

No audible noise when tested with any dimmer.


These lamps cannot be recommended for use with leading edge dimmers, lamps flash and flicker intermittently at maximum output. If used with leading edge dimmers scenes should be set at 90% and below.

Rating for module compatibility

Dimmer Ratings
Dimmer Rating Tested Units Probable Max Units
RMT-500 Excellent 5 8
RML-500 Not Recommended 5 5
RAK4-T Excellent 5 12
WMT-400 Not Tested - -


Scope #1


Scope #2


Scope #3


Scope #4