Aurora - AU-LED1012CV



Main Image

Test Date: 12/12/2017

Dimming Performance

RMT500/RAK4-T Minimum brightness from off: 20% Minimum brightness from max: 20% RML500 Minimum brightness from off: 27% Minimum brightness from max:27%

Smoothness of Dimming

This driver performed notably better with the RAK4-T in comparison to both the RMT500 and RML500. There is a noticeable flash present at the minimum value on both RMT500 and RML500. When tested with all dimmers the tape shimmered noticeably while fading between levels, this problem was more noticeable with the RMT500 than with other dimmers. The dimming profile is extremely grouped towards the bottom end of the dimmer output.

Audible Noise

There is a minor buzzing when used with trailing edge dimmers with a far more noticeable buzzing when used with leading edge dimmers.


With leading edge dimmers this driver caused the tape to flash at minimum output. This problem is fixed by adding additional load to the circuit.

Rating for module compatibility

Dimmer Ratings
Dimmer Rating Tested Units Probable Max Units
RMT-500 Neutral 1 5
RML-500 Neutral 1 3
RAK4-T Good 1 5
WMT-400 Not Tested - -


Scope #1


Scope #2


Scope #3