Dimming Performance

RMT-500: Minimum brightness from off: 2% Minimum brightness from max: 2% RML-500: Minimum brightness from off: 4% Minimum brightness from max: 4% RAK4-T: Minimum brightness from off: 7% Minimum brightness from max: 2% WMT-400: Minimum brightness from off: >1% Minimum brightness from max: >1%

Smoothness of Dimming

There were a few areas of criticism for this fitting with all the dimmers. There was no static flicker observed at any output level with all the dimmers. However there was a slight flicker while fading with the trailing edge dimmers but this was worse with the leading edge dimmer. Both the profiles with the RML-500 and RAK4-T had steps up whereas the profiles of the RMT-500 and WMT-400 were grouped towards the top.

Audible Noise

There was a buzz when testing the fitting with the RML-500

Notes

Picture of fitting tested - https://drive.google.com/open?id=1lA11j8YWr0FCa0hox3oR_Xgr8CpDK709