Collingwood - 1901 Downlight
Downlight with integrated driver
Test Date: 13/02/2020
RMT-500/WMT-400: Minimum brightness from off: 2% Minimum brightness from max: 4% RML-500: Minimum brightness from off: 5% Minimum brightness from max: 4% RAK4-T: Minimum brightness from off: 11% Minimum brightness from max: 11%
Smoothness of Dimming
There were a few areas of criticism for this fitting with all the dimmers tested. There was no static flicker observed at any output level. However there was a slight shimmer while fading on the RMT-500 and RAK4-T but this was worse on the RML-500. The profile of the RMT-500 and WMT-400 were both grouped towards the top where as the profile of the RML-500 was grouped towards the bottom. There was a slight inconsistency with the RML-500 when at a certain level they all turned on one after another instead of at the same time.
There was a buzz when testing with the RML-500 this was worse at low level but stopped at 100%.
Picture of fitting tested - https://drive.google.com/open?id=1rmppqbV14V3IMWEJLzq_Jh1Mu4QOF4FP
Rating for module compatibility
|Dimmer||Rating||Tested Units||Probable Max Units|