Dimming Performance

RMT/RAK4-T: Minimum brightness from off: 5% Minimum brightness from max: 4% RML: Minimum brightness from off: 10% Minimum brightness from max: 5%

Smoothness of Dimming

When used with trailing edge dimmers no static flicker was observed but when tested with the RML500 the fitting flashed when dimmed to near the minimum output. No shimmer while fading was observed at any point in the output range when tested with any dimmer. With all dimmers there is a noticeable step or jump near the top of the output range, editing the profile did little to improve this.

Audible Noise

No audible noise when tested with any dimmer.