Dimming Performance

RMT-500: Minimum brightness from off: >1% Minimum brightness from max: 9% RAK4-T: Minimum brightness from off: 7% Minimum brightness from max: 10% WMT-400: Minimum brightness from off: >1% Minimum brightness from max: 2%

Smoothness of Dimming

There were a few areas of criticism for this fitting when tested with trailing edge dimmers. There was no static flicker observed at any output level. However there was a slight flicker while fading with all the dimmers. The profiles of the RMT-500 and WMT-400 were both grouped towards the top whereas the RAK4-Ts profile had steps up.

Audible Noise

No audible noise when tested with any of the dimmers.

Notes

Picture of fitting tested - https://drive.google.com/open?id=1bhpvk9p0ibLnD8dL5fu6QLQnDGo5MNKT