Dimming Performance

Minimum brightness from off: 2% Minimum brightness from max: 1.5%

Smoothness of Dimming

This dimmer is only recommended for use with trailing edge dimmers. A static flicker could be seen at the minimum output level when tested with all trailing edge dimmers. Also when left on at the maximum output the lamps did flash. With all dimmers except the WMT-400 there was a noticeable shimmer was observed when fading between levels.

Audible Noise

No audible noise when tested with any dimmer

Notes

A maximum rating of "Neutral" can be given due to the flashing when the lamps are at 100% brightness. Top end flash could be mitigated by setting Scenes at no greater than 90% and by uploading a custom profile.