Dimming Performance

RMT-500: Minimum brightness from off: >1% Minimum brightness from max: >1% RAK4-T: Minimum brightness from off: 10% Minimum brightness from max: 9% WMT-400: Minimum brightness from off: >1% Minimum brightness from max: >1%

Smoothness of Dimming

This fitting performed well when tested with all the trailing edge dimmers.There was no static flicker observed with any of the dimmers at any level however there was a slight shimmer while dimming when tested with the RMT-500. The profile of the RMT-500 and WMT-400 were grouped towards the top. There was an inconsistency when turning on with the RMT-500 and WMT-400.

Audible Noise

There was no audible noise with any of the trailing edge dimmers.

Notes

Picture of fitting tested - https://drive.google.com/open?id=1eQKDgTmrfdJdFQCKq6W5NUtpjU9Jh_Th