Dimming Performance

RMT-500: Minimum brightness from off: 2% Minimum brightness from max: <1% RML-500: Minimum brightness from off: 5% Minimum brightness from max: <1% RAK4-T: Minimum brightness from off: 10% Minimum brightness from max: 4% WMT-400: Minimum brightness from off: 3% Minimum brightness from max: <1%

Smoothness of Dimming

This fitting performed well when tested with the trailing edge dimmers but there were a few areas of criticism when tested with the leading edge dimmer. There was no static flicker observed at any output level but there was a slight shimmer while dimming with the RML-500. There was also a slight delay when turning on with the RML-500.

Audible Noise

No audible noise when tested with any dimmer

Notes

Picture of fitting tested - https://drive.google.com/open?id=1JSTfsfIhzOTN8TyBzpDH1SeVo2tz4FH8