Phillips - eW Cove EC Powercore : 523-000004-74

Other

Mains dimmable LED baton 6xLED 4000K

Main Image

Test Date: 20/10/2015

Dimming Performance

RMT500: Minimum brightness from off: 1% Minimum brightness from max: 1% RAK4-T: Minimum brightness from off: 4% Minimum brightness from max: 7%

Smoothness of Dimming

The dimming performance was broadly similar when used with both trailing edge dimmer modules. The fitting did not flicker at any output level and the dimming profile was in general linear and continuous. It is worth noting that most of the dimming was grouped between 30 and 60% of the Rako output. The only difference between the RMT and the RAK4-T is the minimum brightness which is the reason for the different rating of the two dimmers for this fitting.

Audible Noise

No audible noise when used with any dimmer

Notes

This fitting should be used with trailing edge only. When used with leading edge dimmers the fitting dies not turn off.

Rating for module compatibility

Dimmer Ratings
Dimmer Rating Tested Units Probable Max Units
RMT-500 Very Good 1 8
RML-500 Not Recommended 1
RAK4-T Good 1 15
WMT-400 Not Tested

Images

Scope #1

RMT500

Scope #2

RAK4-T