Dimming Performance

RMT-500: Minimum brightness from off: 2% Minimum brightness from max: 1% RML-500/WMT-400: Minimum brightness from off: 6% Minimum brightness from max: 4% RAK4-T: Minimum brightness from off: 5% Minimum brightness from max: 3%

Smoothness of Dimming

There were a few areas of criticism for this fitting when tested with all the dimmers. There was no static flicker observed at any output level. However there was a slight shimmer when dimming down towards the minimum level with all the trailing edge dimmers. The Profile of the RMT-500 and WMT-400 was grouped towards the maximum.

Audible Noise

There was a noticeable buzz on the RML-500 and this was worse at lower levels.

Notes

Picture of fitting tested - https://drive.google.com/open?id=1CL6qW2LsfZK4ZieoGpMRHyTLQtS6Hp7D